 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05215 EM8Q-200 LCD - EMI FILTER/TVS ARRAY APPLICATIONS LCD Displays Cellular Phones Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns QFN-16 FEATURES 12 L2 L1 L3 L4 L5 L6 16 15 14 13 L7 L8 L8 L7 12 11 10 9 ESD Protection > 25 kilovolts Bidirectional EMI Filtering/TVS Low Pass Filters Low Insertion Loss: -3db Roll-Off @ 140MHz Protects Up to Eight(8) Data Lines RoHS Compliant 34 L1 L2 MECHANICAL CHARACTERISTICS QFN-16 Package Weight 0.73 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 8mm Tape and Reel Per EIA Standard 481 Marking: Logo, Part Number and Pin One Defined By Dot on Package 5678 L3 L4 L5 L6 16 PIN QFN PACKAGE 3mm X 3mm PIN CONFIGURATION I/O 1 Pin 2 D1 I/O 2 Pin 1 I/O 3 Pin 16 I/O 4 Pin 15 R1 D2 R2 R3 R4 Pin 3 I/O 5 I/O 6 Pin 4 I/O 7 Pin 5 I/O 8 Pin 6 Pin 14 D1 Pin 13 Pin 12 Pin 11 R5 D2 R6 R7 R8 Pin 7 Pin 8 Pin 9 Pin 10 Note: Center Tab as the Ground. 05215.R2 2/07 1 www.protekdevices.com EM8Q-200 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 15% Soldering Temperature for 10 seconds SYMBOL TA TSTG P R TL VALUE -40 to 85 -55 to 150 100 200 265 UNITS C C mW OHMS C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT @ 25C Unless Otherwise Specified MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 Ohms I/O) ZERO BIAS TYPICAL CAPACITANCE PER LINE TYPICAL FORWARD VOLTAGE V WM VOLTS @ 1mA V(BR) VOLTS @3V ID A @ 10mA VF VOLTS @ 800-3000 MHz dB fc MHz @2.5V, 1 MHz C pF EM8Q-200 Note 1: 20% tolerance. 5.0 6.0 0.1 0.8 25 140 20 0 -5 -10 -15 -20 -25 -30 -35 0.1 FIGURE 1 TYPICAL INSERTION LOSS (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) Insertion Loss - (dB) 1 10 100 1000 10000 Frequency (MHz) 05215.R2 2/07 2 www.protekdevices.com EM8Q-200 GRAPHS FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C) 1.220 1.080 Normalized Resistance 1.040 1.000 0.960 0.920 0.880 -40 -20 0 20 40 Temperature C 60 80 100 1.6 Cj - Capacitance (Normalized) FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts 05215.R2 2/07 3 www.protekdevices.com EM8Q-200 QFN-16 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE C Pin 1 Identified by Dot E D F PACKAGE DIMENSIONS DIM A B C D E F G H I MILLIMETERS 3.000 SQ 1.70 SQ 0.050 1.500 0.500 BSC 0.230 0.05 0.400 0.05 0.750 0.05 0.000 - 0.05 0.203 0.025 INCHES 0.1181 SQ 0.067 SQ 0.002 0.059 0.0196 BSC 0.009 0.002 0.0157 0.002 0.0295 0.002 0.000 - 0.002 0.0079 0.001 A B Chamfer 0.300 x 45 G C L TOP VIEW H SIDE VIEW I NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx 0.05mm ( 0.002"). TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T73 = 7 Inch Reels - 3,000 pieces per 12mm tape, i.e., EM8Q-200-T73. 3. Suffix-T13 = 13 Inch Reels - 10,000 pieces per 12mm tape, i.e., EM8Q-200-T13. 4. Suffix-LF = Pure Tin Plating, i.e., EM8Q-200-LF-T73. 1 MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 5 4.000 0.700 1.000 0.500 0.300 0.1574 0.0275 0.0393 0.0196 0.0118 2 3 5 4 Outline & Dimensions: Rev 0 - 10/06, 06054 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 3.30 0.10 3.30 0.10 1.00 0.10 1.50 0.10 1.75 0.10 5.50 0.10 12.00 0.30 4.00 0.10 2.00 0.05 8.00 0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2006 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05215.R2 2/07 4 www.protekdevices.com |
Price & Availability of EM8Q-200
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |